Use the drop down lists below to tell us about your vehicle:

Chrome Mirror Covers

Product Code: VOY0581#3
Was £55.00
Now £49.50
  • Chrome Mirror Covers (2pc)
  • Manufactured from a 304-grade stainless steel for durability
  • Produced to OEM standards for a perfect fit
  • Made to fit over your Amaroks existing mirrors
  • Fits: VW Amarok (2010-2016).
  Use the vehicle selector above to find out if this item is suitable for your vehicle.
  Only 3 in stock. Order in   for delivery 21/06/19 *
Fits: VW Amarok (2010-2016).

Chrome Mirror Covers (2pc)

Our stylish VW Amarok mirror covers will instantly upgrade the look of your vehicle. The brilliant chrome finish provides a dramatic enhancement to the look of your factory fitted mirrors.

These chrome mirror covers are made from durable, 304 grade stainless steel, making them corrosion resistant. These wing mirror covers will keep your Amarok stylish for years to come!

All our chrome products are produced to OEM standards for a perfect fit. These side mirror covers are designed to fit over your vehicles existing mirrors.

Fitting couldn’t be easier with the pre-applied 3M tape. This tape is designed to provide a strong, permanent bond, making sure your mirror covers stay put.

  • Manufactured from a 304-grade stainless steel for durability
  • Made to fit over your Amarok’s existing mirrors
  • Supplied with strong 3M tape for an easy fit

Instructions:
  1. Wash and clean the area you are working on using a product with degreasing properties (like washing up liquid).
  2. Once cleaned, make sure the area is completely dry before application.
  3. If working at temperatures below 15C make sure you use a hair dryer or heat gun to warm the bodywork. The primer and adhesive works best above these temperatures and anything below can result in fitment failure.
  4. Test fit the product before application. Do not remove the backing tape at this stage.
  5. Once you're happy, apply the included primer to the bodywork and leave to dry for 5 minutes.
  6. When the primer has dried, remove the backing tape from the adhesive strips and fit the product to the bodywork.
  7. After applying the product, press firmly around the surface area. This will help make sure the adhesive is fully in contact with the surface.
  8. After application, make sure you leave the product to sit for at least 2 hours before driving.
  9. Do not exceed 40mph in the first 24 hours as full cure time times takes 72 hours.

* Estimated delivery date