>   >   >   >  Tailored Seat Covers in Grey (Front & Rear Bundle)
Use the drop down lists below to tell us about your vehicle:

Tailored Seat Covers in Grey (Front & Rear Bundle)

Product Code: VY23300#KIT
£79.00
  • Tailored Driver & Front Passenger Seat Covers in Grey (with 2x Headrest Covers)
    Tailored Triple Rear Bench Seat Cover in Grey (with 3x Headrest Covers)
  • Complete protection for full seat against oil, grease, all liquids, pets etc
  • Super durable - made in UK from 600 denier polyester. 100% waterproof & machine washable
  • Elasticated hems and click-shut buckles for a perfect fit. Fully compatible with fold up rear seat base
  • Fits: Nissan Navara NP300 (2016- ). Note: Only Suitable for Double Cab.
  Use the vehicle selector above to find out if this item is suitable for your vehicle.
  In stock. Order in   for delivery 27/06/19 *
Fits: Nissan Navara NP300 (2016- ). Note: Only Suitable for Double Cab.

Tailored Driver & Front Passenger Seat Covers in Grey (with 2x Headrest Covers)
Tailored Triple Rear Bench Seat Cover in Grey (with 3x Headrest Covers)

Made from a hard-wearing 600 denier polyester material and 100% waterproof, these tailored Nissan Navara seat covers are perfect for protecting your seats from general wear as well as grease, oil, food and drink spillages, dog hairs and everyday dirt.

Tailored to your Navara seats, each cover allows full seat movement. Elasticated hems and click-shut buckles for a perfect fit. Fully compatible with fold up rear seat base.

These machine washable seat covers are handsewn in the UK, featuring bound edging, and a top stitched seam to add strength. Combined with a slightly textured finish these seat covers let you drive in comfort.

  • 100% waterproof, machine washable made from 600 denier polyester material
  • Protects seats from spills, grime and general wear and tear
  • Tailored to your Nissan Navara

Care Instructions:

These tailored seat covers can be wiped down with a warm damp cloth to clean dirt, dust or spills. For a deeper clean, they can be removed and machine washed at 30°C using a non-biological powder or liquid detergent. Do not use softener or conditioner. Allow to air dry naturally. Do not tumble dry.


Fitting Instructions:

  1. Remove the headrests from both seats by sliding the headrests upwards and depressing the release latch at the base of the steel headrest stalks. Avoid placing the headrests on the fabric seats as the steel stalks are often lubricated with grease
  2. The Driver's seat cover is identified by the side-airbag opening on the right hand side/offside and conversely the passenger seat cover is identified by the side-airbag opening being on the left-hand-side/nearside. Pop open the plastic side-release buckles connecting the elasticated straps before fitting the cover.
  3. Slide each seat cover over the seat back and push the pouch with soft tubing into the angle of the seat where the back-rest meets the seat base. This provides anchorage for the cover. Pull the rest of the cover over the seat base.
  4. Connect the elastic straps on the ends of the elasticated hem to the buckles on the hem of the back seat panel. The inner straps on the side of the transmission tunnel/centre console go around the side of the seat and connect to the corresponding rear strap. The straps facing the door of the vehicle tuck down the gap on the inside of the plastic moulding and connect to the corresponding rear strap.
  5. The elasticated hem of the cover can be tucked down the down plastic moulding around the seat base for neatness and additional anchorage.
  6. Attach the headrests by locating openings in the top of the cover. Then, fit the headrest cover to the seat headrest, keeping the main seams of the cover facing to the front of the headrest. It is easier to fit the headrest covers once the headrests are fixed in place on the seats.
  7. Place the remaining small cover with the hook and loop tape over the centre console armrest. Connect the hook and loop tape under the lid towards the hinge.
  8. Remove the rear seat headrests and position the cover so that the three long openings are located over the headrest slots. Attach the headrests through these openings to help keep the cover correctly positioned for the rest of the fitting.
  9. Smooth the rest of the cover down the seat back rest and stretch the lower section of the cover over the seat base. Open up the zip and pull the middle seat belt through it and then close up the zip behind the seat belt.
  10. Lift up the seat base and beneath it connect the two elastic straps to each other to tension the elasticated hem of the cover.
  11. Fit the headrest covers to the three headrests noting that the central headrest cover will be a different shape to the two outer headrest covers.
This item is available as part of the following bundles

Tailored Grey Front + Rear Seat Covers & 4pc Carpet Mat

VY24976
  • 1 x Tailored Front Row Seat Covers in Grey (1+1)
  • 1 x Tailored Rear Bench Seat Covers in Grey
  • 1 x Tailored Carpet Floor Mats (4pc)
£88.00Save £7.99

Tailored Grey Front + Rear Seat Covers & 4pc Rubber Mat

VY24977
  • 1 x Tailored Front Row Seat Covers in Grey (1+1)
  • 1 x Tailored Rear Bench Seat Covers in Grey
  • 1 x Tailored Rubber Floor Mats (4pc)
£95.99Save £8.01

* Estimated delivery date